Many people have jumped on board with the Green Movement as a way of conserving energy and precious resources. Considering that the U.S. loses approximately 7 billion gallons of drinking water a day, the plumbing industry is often included in the Green Movement. Fortunately, there are ways you can conserve water use within your home using a few conservation-friendly plumbing tips.
Check for Leaks
The average household leak wastes approximately 10,000 gallons of water a year. The combined amount of water wasted by household leaks a year is approximately 1 trillion gallons. Considering the fact that California is currently experiencing one of the worst recorded droughts, it is important to reduce unnecessary leaks within your home that waste water.
You can easily check for water leaks within your home by doing the following:
- Pay attention to water pressure: A sudden reduction in water pressure could mean you have a water leak or burst pipe.
- Watch your water bill: If you notice an increase in the amount you pay on your water bill, it may mean your household is wasting water because of a leak.
- Check for signs of mold: If you notice mold on the floors, walls and ceilings, or smell mildew, it is often an indication that you have a hidden leak.
If you come across any signs of a leak, contact a plumber from a place like Budget Plumbing & Rooter near you so you can address the problem immediately. Water conservation preserves water for areas in need and reduces your monthly water bill. In other words, you can save money while supporting the Green Movement at the same time.
Use Low-Flow Fixtures
Low-flow plumbing fixtures and aerators save you money each month by reducing your monthly water usage. When left on, a standard sink can push out approximately 2.2 gallons per minute. A low-flow fixture can save approximately 30% of your water usage by decreasing the amount of water flowing from your faucet down to 1.5 gallons per minute.
If every household in the nation installed low-flow plumbing fixtures, it would equate to billions of gallons of water saved each year. Low-flow fixtures allow you to cut back on the amount of water you waste each month while also helping you lower your monthly water bill, and who doesn't enjoy saving a little money now and then?
Install High-Efficiency Fixtures
On top of low-flow fixture, you can save even more water and money with high-efficiency fixtures. A high-efficiency toilets use approximately 1.28 gallons per flush, which is 20% less than the standard 1.6 gallons per flush used by traditional toilets. There is a big difference between low-flush toilets and high-efficiency toilets, or HETs.
A low-flush toilet relies on gravity, meaning you may have to flush more than once to remove all the waste from your toilet. On the other hand, an HET relies on water pressure, meaning you can remove all of your waste in one flush. While a reduction of 20% may not seem like much, it adds up over the course of a year, which saves both money and water.
If you are interested in conserving water throughout your home, contact a professional plumber near you. A plumber can inspect your home for leaks, fix broken pipes and install plumbing low-flow and high-efficiency plumbing fixtures. While you may feel tempted to do installations on your own, keep in mind that you could end up wasting precious time and money.
Unless you know what you're doing, and you have the tools to do it, one mistake could end up causing a major plumbing problem. Fortunately, plumbers have the know-how to install your fixtures for you. A plumber can also provide more recommendations as to how you can decrease your monthly water usage so you can save a little green while you go green.Share