3 Simple Ways To Waterproof Your Home In A Jiffy

The rainy season is here, and that means that your home is at the highest risk for leaks or flooding. Even if you do not live in an area that gets a lot of rain, it is important to properly waterproof all areas of your home. After all, it is better to be safe than sorry. When it comes to waterproofing, most people might be hesitant because they are afraid the process will involve hiring an expensive contractor to do the job. Fortunately, there are a few simple ways that you can waterproof your home, and get the job done in no time at all.

In the Trenches

The biggest culprit of a leak in your home revolves entirely around your foundation. Basically, your foundation is what keeps your home upright and sturdy, so a weakened foundation due to water build up will not only cause structural problems, but also end up flooding your home. The best thing to do to prevent your foundation from becoming over-saturated is to properly divert water away from the home.

When water comes out through your gutters it is designed to flow away from the home. However, if you do not have an adequate sloped path for the water, it will build up around the foundation. What you want to do is build a trench from your gutters to the end of your street or driveway. Start from the beginning of the gutter and start digging on a slope. The best way to ensure a steady flow is to dig about 2" per every foot towards the street.

Have a "Crack" At It

One of the main sources of water infiltration in your home is cracks in the walls or basement. Water can seep through these cracks and create mold or weaken the structure. If you spot any cracks, it is important to start the patching process immediately.

Small cracks are generally an easy fix. You can usually apply a water sealant or epoxy and the material will mold to the wall just fine. However, if you have larger cracks, you are in store for a bit more work basement waterproofing.

In the case of larger cracks, purchase a waterproofing agent, not a water sealant. The difference is that a waterproofer is not only water resistant, but it is a very strong chemical material that will bond with the material in the wall. Once applied, the waterproofer will dry and the wall will be good as new. If you want a little extra insurance, you can purchase waterproofing paint to apply to the exterior of the repaired wall.

Keep It Under Wraps

A great waterproofing method that offers a few serendipitous advantages is house wrapping. Basically, house wrapping is wrapping your home with your choice of a specific synthetic material that is designed to prevent moisture from entering any part of the home. The main types of house wrapping materials include:

  • Fiberglass
  • Micro-perforated film
  • Polypropylene woven film
  • Non-woven, polyethylene fiber

The benefits of house wrap go beyond just preventing water from entering the home. The material used for wrapping offers great insulation, which cuts down on heating and cooling costs inside the home. Also, especially in the case of micro-perforated film wrapping, water vapor that is created through moisture outside the home will flow away from the home. This prevents the home from allowing humidity into the air.

When installing the house wrap it is important to use a specific tape for whatever material you use. Usually, wrap is installed on a home before the doors and windows are in place, but you can simply cut out sections of the wrap where the doors and windows are once you complete the wrapping process.

Waterproofing doesn't have to be a hassle. With a little elbow grease and a few hours work, you will not only be protecting your home from nasty weather, you will also protect your family from a potential disaster.