If you wake up on a major holiday to discover that you have no hot water, you will probably panic. How would you cook, clean, and shower without hot water? The lack of warm water is likely caused by an issue with your hot water heater, and you will need to get this problem fixed ASAP. An emergency plumbing service can come to your rescue, but if you want to avoid this problem in the future, here are three things you should do on a regular basis.
Replace Your Hot Water Heater
A typical hot water heater has a life of 10 to 13 years. While some systems will last longer than this, you will reap benefits by replacing your system every 10 years or so. Here are some of the benefits this offers:
- It will work great – anything that is brand new tends to work better than something that is old. With a new system, you will not have to worry about leaks, outages, or other problems.
- Higher efficiency – a new hot water heater might be at least 20% more efficient than your old tank. This could help you save money on your energy costs.
Over time, your old hot water heater may begin experiencing leaks and mineral buildups. It will begin operating less efficiently and may experience more problems. To help it last longer, you may want to invest in a water softener, or some other type of water purification system.
You can also flush the system periodically as a form of maintenance, and this too may help your current water heater last longer.
Flush It Periodically
Flushing a hot water heater is something that helps clean out the sediment that normally accumulates in a tank, and this is something you should do yearly. Over time, small pieces of debris will end up in the tank, and this is more of a problem for homes that have well water.
As the pieces of debris accumulate, they end up building up on the bottom of the tank. If there is a lot of buildup, it could limit the amount of water your tank will hold. A lot of buildup can also cause clogs to form inside the tank.
To remove this sediment, you must empty the tank. You can do this by attaching a hose to the valve found near the bottom of the tank. After emptying it, you can let some water in the tank and empty it again. This may not remove all of the sediment, but it will remove a good portion of it.
Replace the Anode Rod
Replacing the anode rod in your hot water heater can extend the life of it, and you should also do this at least once each year. The anode rod inside your tank is there to prevent corrosion from occurring.
The anode rod collects corrosion, and the purpose of this is to prevent the corrosion from adhering to the tank itself. It is made from magnesium, aluminum, tin, or a combination of these materials and it is relatively easy to replace.
If you have a water softener, this rod tends to wear out faster from the salt the softener uses. Salt causes more corrosion, and this may cause your anode rod to need to be replaced every six months.
With these three tips, you might be able to completely avoid running out of hot water. While this is especially important on holidays, not having hot water even on a regular day can also be very inconvenient. If you would like to make these repairs or if you need emergency plumbing repairs, call a plumbing company in your area.Share